Skip to main content

Charging instructions Alpitronic Hypercharger

Charging with charging card

1. START CHARGE

  • Hold the card to the card reading field and wait for the further connection check.
  • Select the output you require on the display (CCS, CHAdeMO).
  • Insert the plug into the vehicle's charging socket until it clicks into place.
  • The charging process starts and the display informs you about the battery charge status, remaining charging time, delivered kWh and the charging time that has already expired.
  • After a short time, the screen is automatically locked to protect against unauthorized use. To unlock, hold your RFID card up to the card reading field.

2. STOP CHARGING

  • Hold your customer card up to the card reading field again.
  • Press “Stop” on the display.
  • Unplug the connector and place it back in the holder. With CHAdeMO: release the connector by pressing the push button. Release the parking lot after loading.

Charging via smartphone

1. START CHARGE

  • First, only plug the charging cable into the vehicle.
  • Select the charging point on the charging network map.
  • Press the START button to start charging.
  • After successful authorization, the loading process starts automatically.

2. STOP CHARGING

  • Press the STOP button.
  • Unplug the vehicle.

Important

  • The security check between the vehicle and the charging station can take up to 30 seconds.

  • A combination of the activation methods is not possible - for example, if charging was started via app, it must be ended via app too.

  • In case of malfunctions, please contact our service team by phone: +43 5 031 351 855.