Skip to main content

Charging instructions Siemens VersiCharge

Charging with charging card

1. START CHARGE

  • Briefly hold your charging card to the card reader until a signal sounds.
  • Connect the vehicle to the charging station.
  • The charging session is automatically initiated by the vehicle, the LED light “charging session in progress” illuminates.

2. STOP CHARGING

  • Stop the charging sessions on the vehicle side and unplug the charging cable from the vehicle.
  • Alternatively, the charging card can be held to the card reader, the charging session stops.

Charging via smartphone

1. START CHARGE

  • Connect the vehicle to the charging station.
  • Select the charging point on the charging network map.
  • Press the START button.
  • The charging process starts, the LED “charging session in progress” illuminates.

2. STOP CHARGING

  • Press the STOP button.
  • Unplug the vehicle.

Important

  • The security check between the vehicle and the charging station can take up to 30 seconds.

  • A combination of the activation methods is not possible - for example, if charging was started via app, it must be ended via app too.

  • In case of malfunctions, please contact our service team by phone: +43 5 031 351 855.