Charging instructions Mennekes Amtron

1. START CHARGE

• Hold your charging card to the card reader.
• Now connect the charging cable to your vehicle (if necessary also to the charging socket on the wall box).
• The loading process starts automatically.

Note: If charging does not start within 60 seconds, you will have to hold your card to the card reader again.

2. STOP CHARGING

• End the loading process with the STOP button.
• Disconnect the cable from the vehicle (if necessary, also from the wallbox charging socket).
• It is not necessary to hold the charging card on the card reader again.

Note: If there is a multifunction button or stop button, you can also press this (approx. 10 mm) to end the charging process.

1. START CHARGING PROCESS

• Plug the charging cable into the vehicle only first.
• Select charging point:
  • with charging network card
  • or using the “Scan & Charge” function by scanning the QR code on the plug
• Press the START button to start charging.
• After successful authorization, the charging process starts automatically.

2. END CHARGING PROCESS

• Press the STOP button.
• Unplug the vehicle.