Charging instructions IES Keywatt G3

1. START CHARGE

• Swipe your charging card over the card reader once.
• The device will beep once the card swipe is successful.
• Plug in your vehicle.
• Plug the coupler firmly into the vehicle. The latch should click into place.
• The loading process starts automatically.

2. STOP CHARGING

• Swipe the same charging card, that started the session, over the card reader.
• The display shows that the session is ending.
• After the session ends, the vehicle unlocks the clutch. A click can be heard on the vehicle/clutch.
• Unplug the vehicle after unlocking.
• Return the cable to the dock on the charging station

1. START CHARGING PROCESS

• Plug the charging cable into the vehicle only first.
• Select charging point:
  • with charging network card
  • or using the “Scan & Charge” function by scanning the QR code on the plug
• Press the START button to start charging.
• After successful authorization, the charging process starts automatically.

2. END CHARGING PROCESS

• Press the STOP button.
• Unplug the vehicle.