Charging instruction ABB Terra HP

1. START CHARGE

• Touch the screen to start charging.
• Select the output you need on the display.
• Insert the plug into the vehicle's charging socket until it clicks into place.
• Now press “Start” on the display. After a successful connection check, you will be prompted to identify yourself. To do this, hold the card up to the card reading field and wait for the further connection check.
• The charging process starts and the display informs you about the battery charge status, remaining charging time, delivered kWh and the charging time that has already expired.

2. STOP CHARGING

• Press “Stop” on the display.
• You may need to authorize yourself again - hold your customer card up to the card reader again.
• Unplug the connector and place it back in the holder.

1. START CHARGE

• First, only plug the charging cable into the vehicle.
• Select the charging point on the charging network map.
• Press the START button to unlock the selected socket.
• After successful authorization, the loading process starts automatically.

2. STOP CHARGING

• Press the STOP button.
• Unplug the vehicle.
• Note: unlocking the vehicle can also end the charging process.