Wallbox with cable
IES Keywatt G3

Up to 24 kW can be charged at the DC wallbox IES Keywatt. Please note that the actual charging speed depends on the vehicle model and the available charging power of the respective station. Please refer to the SMATRICS app or the charging station map on our website for more information on the available power.

CHARGING VIA CUSTOMER CARD

IES Keywatt

1. START THE CHARGING PROCESS

  • Pull your charging card over the card reader once.
  • The device will sound as soon as the card has been successfully pulled through.
  • Plug in your vehicle.
  • Insert the clutch firmly into the vehicle. The locking device should snap in.
  • The charging process starts automatically.

 

2. END THE CHARGING PROCESS

  • Pull the charging card with which the session was started over the card reader.
  • The display shows that the session is finished.
  • When the session has ended, the vehicle unlocks the clutch. A click can be heard on the vehicle/clutch.
  • Unplug the car after unlocking.
  • Return the cable to the dock on the charging station.
IES Keywatt

1. START THE CHARGING PROCESS

  • Start the charging process on the app.
  • Plug in your vehicle.
  • Insert the clutch firmly into the vehicle. The locking device should snap in.
  • Watch the display and the charging process begins.

 

2. END THE CHARGING PROCESS

  • Stop the charging process on the app.
  • The display shows that the session is finished.
  • When the session has ended, the vehicle unlocks the clutch. A click can be heard on the vehicle/clutch.
  • Unplug the car after unlocking.
  • Return the cable to the dock on the charging station.

IMPORTANT NOTE

  • The charger stops automatically when charging is complete.
  • The charger adjusts its power according to the requirements of the vehicle and the environment (e.g. temperature and other factors).
  • The security check between the vehicle and wallbox can take up to 30 seconds.
  • If the charging process is started via your mobile phone, it must also be terminated via your mobile phone. A combination of different activation methods (customer card, mobile phone) is not possible.
  • INCIDENTS: If the LED light flashes red, please contact the service hotline +43 5 0313 51855.