Wallbox with and without cable
Keba P30

Depending on the vehicle model, the Keba wallbox can be charged with a maximum power of 22 kW (32A). The charging capacity is shown in the technical data of the vehicle. Accordingly, the actual loading speed also depends on the vehicle model and the available loading capacity of the respective station. Please refer to the SMATRICS app or the charging station map on our website for more information on the available power.

CHARGING VIA CUSTOMER CARD

1. START THE CHARGING PROCESS

  • Connect your vehicle’s charging cable to station and vehicle.
  • Hold your charging card up to the card reader, until a signal is heard.
  • The charging process starts. The LED light flashes green.

 

2. END THE CHARGING PROCESS

  • Disconnect the charging cable from the vehicle.
  • It is not necessary to hold the charging card up to the card reader again.

CHARGING VIA SMARTPHONE

1. START THE CHARGING PROCESS

  • Connect your vehicle’s charging cable to station and vehicle.
  • Select the charge point on the charging map.
  • Press the START button.
  • The charging process starts. The LED light flashes green.

 

2. END THE CHARGING PROCESS

  • Press the STOP button.
  • Disconnect the charging cable from the vehicle.

IMPORTANT NOTE

  • The security check between the vehicle and wallbox can take up to 30 seconds.
  • If the charging process is started via your mobile phone, it must also be terminated via your mobile phone. A combination of different activation methods (customer card, mobile phone) is not possible.
  • INCIDENTS: If the LED light flashes red, please contact the service hotline +43 5 0313 51855.